Howto setup openvpn in bridge mode on debian
Below is my setup for a OpenVPN server in bridged mode with local firewall.
In short we will create a VPN server with the following setup:
[one_half]
[/one_half]
[one_half_last]
[arrow_list]
[list_item]Debian 6 as VPN server.[/list_item]
[list_item]VPN Server on TCP port 443 (SSL)[/list_item]
[list_item]2048bit key size[/list_item]
[list_item]Local subnet of 192.168.255.0/24[/list_item]
[list_item]Max 10 VPN Clients[/list_item]
[list_item]All config files will be kept in /etc/openvpn[/list_item]
[list_item]Local firewall to control access for VPN users[/list_item]
[/arrow_list]
[/one_half_last]
If you are using ESXi follow this post first:Â OpenVPN bridge and vmware esxi.
Installation
First install the required packages:
apt-get install openssl bridge-utils openvpn zip |
Copy over the example easy-rsa 2.0 data to /etc/openvpn
cp -a /usr/share/doc/openvpn/examples/easy-rsa/2.0/ /etc/openvpn/easy-rsa |
Now we need to edit the vars file in the easy-rsa folder to match your organization information, so change EXAMPLE to your own info.
cd /etc/openvpn/easy-rsa sed -i '/export EASY_RSA=/ c\export EASY_RSA=\"/etc/openvpn/easy-rsa\"' vars sed -i '/export KEY_SIZE=/ c\export KEY_SIZE=2048' vars sed -i '/export KEY_COUNTRY=/ c\export KEY_COUNTRY=\"EXAMPLE\"' vars sed -i '/export KEY_PROVINCE=/ c\export KEY_PROVINCE=\"EXAMPLE\"' vars sed -i '/export KEY_CITY=/ c\export KEY_CITY=\"EXAMPLE\"' vars sed -i '/export KEY_ORG=/ c\export KEY_ORG=\"EXAMPLE\"' vars sed -i '/export KEY_EMAIL=/ c\export KEY_EMAIL=\"user\@example.com\"' vars |
Now build your CA and server key (you already have provided all the right info in the vars file so press enter all the way through).
source ./vars ./clean-all ./build-ca ./build-key-server server ./build-dh |
Now we need to create a server.conf file in /etc/openvpn
cd /etc/openvpn && vi server.conf |
server.conf
I will use TCP port 443 for the VPN server with a local subnet of 192.168.255.0/24
IP’s 192.168.255.200~192.168.255.210 will be used for client DHCP (max 10 clients), and 192.168.255.3 is the OpenVPN server himself.
port 443 proto tcp dev tap0 ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh2048.pem ifconfig-pool-persist ipp.txt server-bridge 192.168.255.3 255.255.255.0 192.168.255.200 192.168.255.210 keepalive 10 120 comp-lzo persist-key persist-tun log /var/log/openvpn.log log-append /var/log/openvpn.log status /var/log/openvpn-status.log verb 3 #===================================================# # Client Settings #===================================================# # If you need to push routes you can do so here for example: #push "route 192.168.0.0 255.255.255.0 192.168.255.1" push "ping 10" push "ping-restart 60" push "dhcp-option DOMAIN example.local" push "dhcp-option DNS 192.168.255.1" push "dhcp-option DNS 192.168.255.2" push "dhcp-option WINS 192.168.255.1" push "route-delay 5" push "echo " push "echo Welcome to the EXAMPLE Network!" push "echo "
Now we need to bridge the OpenVPN tap0 interface with your network interface (eth0 in this example).
Make sure to change the settings for your network (IP, subnet, gateway etc) as this will replace your current interface configuration don’t do this remotely.
vi /etc/init.d/bridge |
/etc/init.d/bridge
#!/bin/bash ### BEGIN INIT INFO # Provides: bridge # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: # Short-Description: Bridge for OpenVPN ### END INIT INFO # Define Bridge Interface br="br0" # Define list of TAP interfaces to be bridged, # for example tap="tap0 tap1". tap="tap0" # Define physical ethernet interface to be bridged # with TAP interface(s) above. eth="eth0" eth_ip="192.168.255.3" eth_netmask="255.255.255.0" eth_broadcast="192.168.255.255" gw="192.168.255.254" ################################# # Set up Ethernet bridge on Linux # Requires: bridge-utils ################################# start_bridge () { for t in $tap; do openvpn --mktun --dev $t done brctl addbr $br brctl addif $br $eth for t in $tap; do brctl addif $br $t done for t in $tap; do ifconfig $t 0.0.0.0 promisc up done ifconfig $eth 0.0.0.0 promisc up ifconfig $br $eth_ip netmask $eth_netmask broadcast $eth_broadcast up route add default gw $gw $br } #################################### # Tear Down Ethernet bridge on Linux #################################### stop_bridge () { ifconfig $br down brctl delbr $br for t in $tap; do openvpn --rmtun --dev $t done ifconfig $eth $eth_ip netmask $eth_netmask broadcast $eth_broadcast up route add default gw $gw $eth } #################################### # OPTIONS #################################### case "$1" in start) echo -n "Starting Bridge" start_bridge ;; stop) echo -n "Stopping Bridge" stop_bridge ;; restart) stop_bridge sleep 2 start_bridge ;; *) echo "Usage: $0 {start|stop|restart}" >&2 exit 1 ;; esac
Now make the script executable and set it as a default startup script:
chmod 755 /etc/init.d/bridge update-rc.d bridge defaults |
User creation script
For easy management I create a template config file and a script to create the certificate and zip the certificates and config file so you can send it to a user.
First we will create a template config file for openvpn, make sure to edit the VPNSERVERHOSTNAME to your hostname/ip for the VPN Server.
Create a configs directory, here we will keep the user configuration zip files later on.
cd /etc/openvpn mkdir configs cd /etc/openvpn/configs vi template-config.ovpn |
client dev tap proto tcp remote VPNSERVERHOSTNAME 443 resolv-retry infinite nobind pkcs12 <>.p12 ns-cert-type server comp-lzo verb 3 #redirect-gateway
Then create the new-user script.
cd /etc/openvpn vi new-user |
#!/bin/bash action="$1" option="$2" base="/etc/openvpn" # #if [ -n $base/configs/$username ] #----------------------------------------------------------------# # new user #----------------------------------------------------------------# function new_user() { echo "Creating the new user $username" # source the easy-rsa variables: source $base/easy-rsa/vars echo "Checking if user already exists" if [ -x $base/configs/$username ] then echo "ERROR: user already exists" echo "" exit 0 else echo "Please check the already filled in answers and press" echo "enter for all the options finaly press 'Y' twice." echo "" sleep 5 $base/easy-rsa/build-key-pkcs12 $username echo "Creating the config directory" userdir=$base/configs/$username mkdir $userdir cp $base/easy-rsa/keys/$username.p12 $userdir cp $base/configs/template-config.ovpn $userdir/$username.ovpn sed -i "s/<>/$username/g" $userdir/$username.ovpn cd $userdir /usr/bin/zip $userdir/$username.zip $username.* echo "" echo "User created" echo "" fi } #----------------------------------------------------------------# # show the usage #----------------------------------------------------------------# function show_usage() { echo "" echo "Usage: $0 [option] [arg]" echo "Where [option] is:" echo "" echo "-new" echo " Create a new user" echo " [arg] = " echo "" echo "" } #----------------------------------------------------------------# #----------------------------------------------------------------# # Parse action #----------------------------------------------------------------# function parse_action() { case $action in -new) username="$option" new_user ;; *) show_usage ;; esac exit 0 } #----------------------------------------------------------------# #----------------------------------------------------------------# # Main function #----------------------------------------------------------------# function main() { if [ "X${action}" == "X" ] then show_usage exit 0 else parse_action fi } #----------------------------------------------------------------# #----------------------------------------------------------------# # run the Main script #----------------------------------------------------------------# main #----------------------------------------------------------------#
Now make the script executable and run it with “-new johndoe” to create a new vpn certificate for user John Doe.
cd /etc/openvpn chmod 700 new-user ./new-user -new johndoe |
And finally we start the openvpn service:
/etc/init.d/openvpn start |
Firewall
Now we add a IPtables firewall script to protect the network from the VPN clients.
mkdir /opt/firewall vi /opt/firewall/localfw |
#!/bin/bash #----------------------------------------------------# # Firewall for bridged openvpn # ver 0.1 20111021 #----------------------------------------------------# echo "--------------------------------" echo "IPTABLES FIREWALL SCRIPT LOADING" echo "--------------------------------" modprobe ip_tables #--------------IP Variables -------------------------# DNS1=192.168.255.1 # dns server 1 DNS2=192.168.255.2 # dns server 2 DNSSERVERS="$DNS1 $DNS2" WAN_IF="br0" # WAN Interface WAN_IP="192.168.255.3" # WAN IP LANRANGE="192.168.255.0/24" # LAN Range #-----------------------------------------------------# IPTABLES="/sbin/iptables" # path to iptables #-----------------------------------------------------# # Check how we are started CMD=$1 echo "Checking how we are started" if ( [ -z $CMD ] ); then CMD="start"; fi #-----------------------------------------------------# #-----------------------------------------------------# if ( [ $CMD = "start" ] ); then #-----------------------------------------------------# echo "checking if we need to enable IP forwarding" IPFWDCHK="`cat /proc/sys/net/ipv4/ip_forward`" if ( [ "$IPFWDCHK" != "1" ] ); then echo "IP forwarding not enabled yet enabling forwarding now" echo 1 > /proc/sys/net/ipv4/ip_forward fi #--------------- Firewall default --------------------# # Default policy: ACCEPT $IPTABLES -P FORWARD ACCEPT $IPTABLES -P INPUT ACCEPT $IPTABLES -P OUTPUT ACCEPT # Flush echo "Flushing all rules" $IPTABLES -F $IPTABLES -t mangle -F $IPTABLES -t nat -F $IPTABLES -F FORWARD $IPTABLES -F INPUT $IPTABLES -F OUTPUT # Default policy: ACCEPT $IPTABLES -P FORWARD ACCEPT $IPTABLES -P INPUT ACCEPT $IPTABLES -P OUTPUT ACCEPT #-----------------------------------------------------# # high-volumes $IPTABLES -N Aforward #allow fragmentation-needed $IPTABLES -A Aforward -p icmp --icmp-type fragmentation-needed -j ACCEPT fi echo "Start setting VPN Client rules" #-----------------------------------------------------# # VPN CLIENT RULES FROM HERE # #-----------------------------------------------------# if ( [ $CMD = "VPN" -o $CMD = "start" ] ); then #################################################### # VPN Clients ######################### echo " - Setting rules for VPN Clients" $IPTABLES -F vpn-clients $IPTABLES -X vpn-clients $IPTABLES -N vpn-clients if ( [ $CMD = "start" ] ); then for ip in 192.168.255.200 192.168.255.201 192.168.255.202 192.168.255.203 192.168.255.204 192.168.255.205 192.168.255.206 192.168.255.207 192.168.255.208 192.168.255.209 192.168.255.210 do $IPTABLES -A FORWARD -s $ip -j vpn-clients $IPTABLES -A FORWARD -d $ip -j vpn-clients done fi # YOUR RULES GO HERE # HTTP to a local webserver (for example) $IPTABLES -A vpn-clients -p tcp -d 192.168.255.10 --dport 80 -j ACCEPT $IPTABLES -A vpn-clients -p tcp -s 192.168.255.10 --sport 80 ! --syn -j ACCEPT # ALLOW Ping $IPTABLES -A vpn-clients -p icmp -j ACCEPT # DROP ALL Other $IPTABLES -A vpn-clients -j LOG --log-prefix "[DROP-vpn-clients ]" $IPTABLES -A vpn-clients -j DROP ######################### # VPN range #################################################### fi #-----------------------------------------------------# echo "Done setting VPN Client Rules" #-----------------------------------------------------# # VPN CLIENT RULES UNTIL HERE # #-----------------------------------------------------# #-----------------------------------------------------# if ( [ $CMD = "start" ] ); then #******************************************************** # VPNServer local rules #******************** echo "Setting local rules" # ssh in $IPTABLES -A INPUT -p tcp -d $WAN_IP --dport 22 -j ACCEPT $IPTABLES -A OUTPUT -p tcp -s $WAN_IP --sport 22 ! --syn -j ACCEPT # VPN in $IPTABLES -A INPUT -p tcp -d $WAN_IP --dport 443 -j ACCEPT $IPTABLES -A OUTPUT -p tcp -s $WAN_IP --sport 443 -j ACCEPT # DNS lookups naar DNS for i in $DNSSERVERS do $IPTABLES -A OUTPUT -p udp --sport 53 -d $i -j ACCEPT $IPTABLES -A INPUT -p udp -s $i --sport 53 -j ACCEPT $IPTABLES -A OUTPUT -p udp -d $i --dport 53 -j ACCEPT $IPTABLES -A INPUT -p udp -s $i --dport 53 -j ACCEPT $IPTABLES -A OUTPUT -p tcp -d $i --dport 53 -j ACCEPT $IPTABLES -A INPUT -p tcp -s $i --dport 53 -j ACCEPT $IPTABLES -A OUTPUT -p tcp --sport 53 -d $i ! --syn -j ACCEPT $IPTABLES -A OUTPUT -p udp --dport 123 -j ACCEPT $IPTABLES -A INPUT -p udp --sport 123 -j ACCEPT done # local everything $IPTABLES -A OUTPUT -p tcp -d 127.0.0.1 -s 127.0.0.1 -j ACCEPT $IPTABLES -A INPUT -p tcp -s 127.0.0.1 -d 127.0.0.1 -j ACCEPT $IPTABLES -A INPUT -p tcp -d 127.0.0.1 -s 127.0.0.1 -j ACCEPT $IPTABLES -A OUTPUT -p tcp -s 127.0.0.1 -d 127.0.0.1 -j ACCEPT $IPTABLES -A OUTPUT -p udp -d 127.0.0.1 -s 127.0.0.1 -j ACCEPT $IPTABLES -A INPUT -p udp -s 127.0.0.1 -d 127.0.0.1 -j ACCEPT $IPTABLES -A INPUT -p udp -d 127.0.0.1 -s 127.0.0.1 -j ACCEPT $IPTABLES -A OUTPUT -p udp -s 127.0.0.1 -d 127.0.0.1 -j ACCEPT $IPTABLES -A OUTPUT -p icmp -d 127.0.0.1 -s 127.0.0.1 -j ACCEPT $IPTABLES -A INPUT -p icmp -s 127.0.0.1 -d 127.0.0.1 -j ACCEPT $IPTABLES -A INPUT -p icmp -d 127.0.0.1 -s 127.0.0.1 -j ACCEPT $IPTABLES -A OUTPUT -p icmp -s 127.0.0.1 -d 127.0.0.1 -j ACCEPT # browse (apt, etc..) $IPTABLES -A OUTPUT -p tcp -s $WAN_IP --dport 80 -j ACCEPT $IPTABLES -A INPUT -p tcp -d $WAN_IP --sport 80 ! --syn -j ACCEPT $IPTABLES -A OUTPUT -p tcp -s $WAN_IP --dport 443 -j ACCEPT $IPTABLES -A INPUT -p tcp -d $WAN_IP --sport 443 ! --syn -j ACCEPT # ALLOW ICMP $IPTABLES -A INPUT -p icmp -j ACCEPT $IPTABLES -A OUTPUT -p icmp -j ACCEPT # deny rest $IPTABLES -A INPUT -j LOG --log-prefix "[DROP-INPUT-WAN] " $IPTABLES -A INPUT -j DROP $IPTABLES -A OUTPUT -j LOG --log-prefix "[DROP-OUTPUT-WAN] " $IPTABLES -A OUTPUT -j DROP #$IPTABLES -A FORWARD -j LOG --log-prefix "[DROP-FORWARD-WAN] " $IPTABLES -A FORWARD -j DROP # Reset default policy: DROP $IPTABLES -P FORWARD DROP $IPTABLES -P INPUT DROP $IPTABLES -P OUTPUT DROP fi #-----------------------------------------------------# echo "--------------------------------" echo "IPTABLES FIREWALL SCRIPT LOADED " echo "--------------------------------" #-----------------------------------------------------# #eof #-----------------------------------------------------#
Then make the script executable and add the firewall to run at startup
chmod 700 /opt/firwall/localfw vi /etc/rc.local (add <strong>/opt/firewall/localfw</strong> just before exit 0) |
VPN status
This script will show you some statistics on the VPN server.
vi /usr/local/bin/openvpn-status |
#!/usr/bin/env python # -*- coding: utf-8 -*- STATUS = "/var/log/openvpn-status.log" status_file = open(STATUS, 'r') stats = status_file.readlines() status_file.close() hosts = [] headers = { 'cn': 'Common Name', 'virt': 'Virtual Address', 'real': 'Real Address', 'sent': 'Sent', 'recv': 'Received', 'since': 'Connected Since' } sizes = [ (1<<50L, 'PB'), (1<<40L, 'TB'), (1<<30L, 'GB'), (1<<20L, 'MB'), (1<<10L, 'KB'), (1, 'B') ] def byte2str(size): for f, suf in sizes: if size >= f: break return "%.2f %s" % (size / float(f), suf) for line in stats: cols = line.split(',') if len(cols) == 5 and not line.startswith('Common Name'): host = {} host['cn'] = cols[0] host['real'] = cols[1].split(':')[0] host['recv'] = byte2str(int(cols[2])) host['sent'] = byte2str(int(cols[3])) host['since'] = cols[4].strip() hosts.append(host) if len(cols) == 4 and not line.startswith('Virtual Address'): for h in hosts: if h['cn'] == cols[1]: h['virt'] = cols[0] fmt = "%(cn)-25s %(virt)-18s %(real)-15s %(sent)13s %(recv)13s %(since)25s" print fmt % headers print "\n".join([fmt % h for h in hosts])
Now make the script executable.
chmod 700 /usr/local/bin/openvpn-status |
If you run it and a client is connected you will see something like this:
# /usr/local/bin/openvpn-status Common Name Virtual Address Real Address Sent Received Connected Since johndoe 00:00:00:00:00:00 1.2.3.4 1.11 MB 489.49 KB Wed Dec 11 13:26:42 2011 |
Some error when I try to start the script:
/usr/local/bin/openvpn-status
File “/usr/local/bin/openvpn-status”, line 22
(1< = f:
^
SyntaxError: invalid syntax
Debian 6.0
The OpenVPN status code seemed to be corrupted somehow (must have made a mistake while copy/paste the code here.) If you re-download the code it should be working now.
(btw the source for the python script is from code.geek.sh: http://code.geek.sh/2009/07/simple-openvpn-server-statistics/)
Pingback: DeathIsland – Androidã¨VPN
There are few syntax error in your code. pls check and fix it. some of it regarding this character. >&
Thanks a lot for that nice conversion from openvpn’s examples to a working bridge init script. Very appreciated here, since I fiddled around a good time before I came here. No my bridged VPN daemon runs just nice and without dirty hacks.
Cheers!
Pingback: OpenVPN | Memo